75-Inch TV Tilt Mounted with Soundbar in a Dallas, GA Bedroom

A Dallas, GA homeowner wanted their 75-inch TV mounted on the bedroom wall above an existing dresser, with a compact soundbar mounted directly beneath the screen instead of sitting on the furniture. Because the panel sits above standard seated height, a tilting mount was used so the picture can be angled down toward the bed.

The 75-inch panel was centered on the drywall wall above the dark wood dresser and set at a height that clears the furniture top while staying comfortable to watch from the bed. A tilting bracket lets the screen angle downward to eliminate the glare and off-axis washout that comes from a high mount. The soundbar was wall-mounted on its own bracket directly below the TV, precisely centered to the panel so the two components read as a single unit, and cabling was dropped straight down behind the dresser to the wall receptacle so nothing hangs in view.

Studs were mapped across the bedroom wall so the 75-inch tilt bracket could be lag-bolted into two structural studs rather than relying on drywall anchors — critical at this screen size and weight. Mount height was set against the seated sightline from the bed, then the plate was laser-leveled and checked against the crown molding line so the panel reads square in the room. The soundbar bracket was leveled and centered to the TV plate with matched spacing beneath the screen, and cable runs were dressed tight and dropped behind the dresser. The full assembly was load-tested through the complete tilt range before handoff.

The Dallas bedroom now has a 75-inch screen floating cleanly above the dresser with the soundbar mounted right underneath in perfect alignment — no cords draped down the wall and no speaker cluttering the furniture top. The tilt keeps the picture aimed at the bed for comfortable viewing, and the whole install is stud-anchored and backed by our 5-year workmanship warranty.

75-inch TV • Tilt mount • Drywall • Dallas, GA 30157