The Clean Look: Wire Concealment for Open-Concept Atlanta Homes
In an open floor plan, every cable is visible from three rooms. Here's how we eliminate visible wires for a magazine-clean install.
Open-concept floor plans dominate new construction in Atlanta — and they make TV cables impossible to hide with traditional tricks. When your living room is visible from the kitchen, the dining nook, and the entry hallway, even a single dangling HDMI cable is a constant visual distraction.
If you've been searching "tv installation near me" and care about how the finished install actually looks, wire concealment isn't an upgrade — it's the whole point.
Why Open-Concept Homes Are Different
In a traditional closed living room, you can use a small TV stand below the wall mount to hide cables in plain sight. In an open-concept space:
- The TV wall is often viewed from 3+ angles
- A console or stand below the TV often isn't part of the design
- Designer lighting amplifies any visible imperfection
- The fireplace surround is often the focal point of the entire main level
The Three-Layer Wire Concealment Approach
For premium open-concept installs, we use a three-layer approach:
- Layer 1: Recessed outlet behind the TV. Eliminates the power cord.
- Layer 2: In-wall HDMI + low-voltage routing. Pulls the signal cables down inside the wall to your equipment location.
- Layer 3: Hidden equipment placement. Streaming devices, cable boxes, and One Connect Boxes hidden inside a closed media cabinet, decorative niche, or even a different room (with HDMI extender).
Where to Hide the Equipment
- Closed media cabinet with IR/RF extender so remotes still work
- Decorative shelf niche with cable cutout
- Adjacent closet or basement with HDMI-over-Ethernet extender
- Floating designer console with bottom cable port
Special Considerations for Fireplace Walls
Open-concept Atlanta homes almost always feature a centerpiece fireplace. Wire concealment on a stone, brick, or tile fireplace requires:
- A recessed cable plate above the firebox
- A second plate hidden in the mantel or below the surround
- Heat-rated cable in the masonry chase
- Coordination with our fireplace TV mounting service
Pricing for Open-Concept Wire Concealment
Open-concept installs typically run $299–$599 for full wire concealment, depending on:
- Surface (drywall vs. masonry)
- Distance between TV and equipment
- Number of devices being concealed
- Whether a recessed outlet is needed
Common Open-Concept Atlanta Neighborhoods
- Buckhead luxury new builds
- Sandy Springs modern remodels
- Alpharetta and Milton open great rooms
- East Cobb updated traditional homes
- Inman Park & Old Fourth Ward modern lofts
Related Reading
- In-Wall Wire Concealment and Audio Setup Guide
- Cable Management Checklist for Home Theater
- Hiding the One Connect Box
Get a Free On-Site Consultation
Call (678) 870-8890 or request a quote.
Frequently Asked Questions
Can you hide all wires in an open-concept floor plan?
In nearly all cases, yes. Open-concept walls are typically standard interior drywall, which is ideal for in-wall wire concealment with a recessed outlet.
Where do streaming devices and cable boxes go?
We hide them in a closed media cabinet, decorative niche, or even a separate room using an HDMI-over-Ethernet extender. Remote signals still work via IR/RF extenders.
Is wire concealment more expensive in an open-concept home?
Slightly. Premium open-concept installs typically run $299–$599 because they often involve longer cable runs and coordination with fireplace masonry.
Can you do wire concealment on a stone fireplace?
Yes. Fireplace wire concealment is one of our specialties. We use diamond-tipped masonry bits and heat-rated cabling.
How long does open-concept wire concealment take?
Typically 2–4 hours including the TV mount, depending on cable run length and any masonry work involved.